[ Home ] [ Up ] [ Circle Cutter Mat ] [ Circle Cutter ] [ Dritz Mats ] [ Omnigrid Mats ] [ Edmonds Oval ] [ Edmonds Wonder ] [ Q Snap ] [ Stack N Whack ] [ Safety Shield ] [ Omnigrid Rulers ] [ Tiger Tape ] [ Fons & Porter Triangle Trimmers ] [ 6 " Centering Ruler ] [ O'LIPFA Safety Shield ] [ Rotary Cutter ] [ Rotary Replacement Blade 45mm ] [ Tri-Sharp 45mm Sharpener ] [ Tri-Sharp 45mm Replacement disk ] [ Tri-Sharp 60mm Sharpener ] [ Creative Cut Ruler ] [ 60mm Straight Rotary Blade ]

Tri-Sharp Dual Rotary Blade Sharpener

Retail: $17.95 (45mm)     Retail: $15.95 (28mm)  

45mm                                         28mm

Item Number: trisharp-1           Item Number: S-Tri28mm

Don't throw away those old blades!   Sharpen them, and use them again and again!   

The Rotary Blade Sharpener is good for over a HUNDRED  SHARPENING's!

Directions on how to sharpen Rotary Cutter Blades, step by step!

1 .Remove blade from rotary cutter, just as you would if you were going to replace the blade with a new one

2. Carefully place blade onto screw side of handle and join sides of handle together

3. Place blade directly on black abrasive disk

4. Turn blade just a few (2 or 3) complete rotations on black abrasive disk. Be sure to do this an equal number of turns on each side of blade to assure proper sharpening. When sharpening, rotate 1/2 turn, and then lift your thumb and fingers off of the tool and reposition your hand for the next 1/2 turn. This will help to evenly distribute the pressure placed on the blade and sharpener.

5. When you have finished sharpening your blade, remove it from the sharpener, and replace in your rotary cutter...it’s that easy!

The entire process, from start to finish, takes just a couple of minutes.  You have saved money...you have been environmentally friendly...and you are ready to cut with your Rotary Cutter again!  Experience has proven that Rotary Blades from all brands of Rotary Cutters can be sharpened 50 to 100 times!